Frigidaire Oven Repair in Philadelphia

Start with the basics of the line: Frigidaire ovens come in its wall ovens and ranges, and the newer Gallery models include air-fry modes and true convection.

The failures that repeat across Frigidaire ovens are burned-out broil and bake elements, weakening gas igniters, faulty oven temperature sensors, and keypad and control board faults. Owners usually describe one of these: oven slow to warm up or staying cold, temperature not accurate, and error code on the control display. When a Frigidaire gas oven is slow to light, the igniter is usually weak: it glows but cannot pull enough current to open the valve. A gas oven that is slow to light usually has a weak igniter that cannot draw enough current to open the valve.

In a Frigidaire gas oven the hot-surface igniter also opens the gas valve, which is why a weak one can glow while the burner stays dark. On electric models the bake element is the most common failure, and replacing it is simple. Keypad and control board faults show up more often on heavily used ovens or after a self-clean cycle.

Condo kitchens in Center City towers often fit a wall oven into tight cabinetry, so removing it for repair can take extra time and some planning with the building. Bake and broil fail independently, so we check each circuit on its own.

Look near the top of the left wall inside the fresh-food section for a Frigidaire refrigerator's tag; on ranges, it sits on the frame behind the storage drawer. Jobs such as the weakening gas igniters come with a written estimate up front and a 90-day parts, 30-day labor warranty when they are finished.

Replace a torn or flattened door gasket, since lost heat makes the oven work harder. If you are seeing error code on the control display, or anything else off with your Frigidaire oven, book a visit and we will confirm the cause before quoting.