Maytag Freezer Repair in Philadelphia

Knowing which Maytag freezer design you have is step one, and Maytag's freezers include chest and upright models plus its refrigerators' freezer sections, all using Whirlpool refrigeration hardware.

More often than not, the trouble with a Maytag freezer is compressors and start relays, worn door gaskets, defrost breakdowns in frost-free uprights, or failed thermostats. Symptoms that bring us out include running but not cold enough, frost forming on a frost-free unit, and warm air leaking past the seal. If a garage freezer runs nonstop but food stays soft, the surrounding heat may be too much for it, so check the room temperature as well as the freezer. If food on the upper shelves of an upright softens while the bottom stays hard, suspect the evaporator fan or a defrost fault.

Frost-free uprights rely on a defrost thermostat and heater, while chest models use manual defrost with simpler controls. When a unit runs without cooling, a bad condenser fan or start relay is common, and either costs much less than a compressor. In garages, dust and heat on the condenser are often the true cause.

Humid summer air settles on a cold freezer cabinet in a basement, and rust around the base and hinges follows if the area is never dried out. Temperature, airflow and the frost pattern usually point straight at the failed part, so that is where a freezer diagnosis begins.

Because Maytag parts travel through Whirlpool's distribution network, most are on hand within a day or two, and many share Whirlpool part numbers. A fix for the defrost breakdowns in frost-free uprights is priced in writing beforehand and warranted afterward: 90 days on parts, 30 on labor.

Keep the condenser area free of dust and storage, and leave the unit a little room from the wall. We see clicking but not starting on Maytag freezers in rowhouses, twins and high-rises across the city.